Automatic charging and maintenance for vehicle and motorcycle batteries, with reconditioning mode.
The MXS 3.8 is an advanced microprocessor controlled battery charger which gives unrivalled performance for lead acid batteries from 1.2-85Ah. It comes with automatic temperature compensation built in which ensures the best charging performance, even in the most extreme conditions.
The MXS 3.8 also includes battery diagnosis to establish whether your battery can receive and retain a charge, patented automatic desulphation program, an AGM option which maximises the performance life of most Stop/Start batteries and a special Recond mode for reconditioning deeply discharged batteries. The MXS 3.8 uses CTEKs patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods.
The MXS 3.8 is an advanced microprocessor controlled battery charger which gives unrivalled performance for lead acid batteries from 1.2-85Ah. It comes with automatic temperature compensation built in which ensures the best charging performance, even in the most extreme conditions.
The MXS 3.8 also includes battery diagnosis to establish whether your battery can receive and retain a charge, patented automatic desulphation program, an AGM option which maximises the performance life of most Stop/Start batteries and a special Recond mode for reconditioning deeply discharged batteries. The MXS 3.8 uses CTEKs patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods.
- Input: 240V, Output: 12V, Charge rate: 3.8A
- 7 stage charge algorithm
- Ideal charger for everyday use
- Charge Voltage
Small, Normal: 14.4V, Cold/AGM: 14.7V - Min battery voltage: 2.0V
- Patented Float/Pulse maintenance and diagnosis of battery condition
- Rated Voltage: AC 220-240VAC, 50-60Hz
- Current, mains: 0.5A rms (at full charging current)
- Back current drain : <1Ah/month
- Ripple: <4%
- Operating temperate range: -20°C to +50°C, output power is reduced automatically at high temperatures
- IP65 rating for water and dust ingress
- Suitable for Lead acid, WET, MF, Calcium, AGM and GEL batteries 1.2Ah-85Ah or up to 130Ah for maintenance
- Special settings for changing in cold conditions and for AGM batteries
- Supplied with M6 connect eyelet cable and connect clamp cable
- Dimensions: 38(h) x 168(w) x 65(d) mm, Weight: 0.6kg
- 5 year warranty
- Supplier part number: 56-988
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
