Fully automatic submersible bilge pump.
- 12V
- 19mm (3/4'') outlet
- Easy clean snap-lock strainer base
- Completely submersible
- Pump turns on when water level rises and shuts off when water is removed (On at 40-50mm - Off at 20-30mm water level)
- Also manually switchable
- Marine grade 1 metre wiring
- 3A maximum current draw
- 103(h) x 145(l) x 83(w) mm (including outlet port)
| Brand | Seaflo |
|---|
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
Product Questions
Would this be suitable for use in a 200 x 200 x 200 sump pit at the bottom of a lift shaft in a home ? It would require very occasional use (if at all) so what battery would you recommend for this ? Many thanks, Rob
Question by: Rob Mallinson on 17/10/2021, 8:59 pm
This may be suitable for your application. For a battery you could consider something like this
https://www.burnsco.co.nz/battery-sealed-agm-7amp
but be aware that battery will discharge and deteriorate over time. To overcome this you could connect battery to a trickel charger or alternatively connect the pump to a small 12V power supply.
https://www.burnsco.co.nz/battery-sealed-agm-7amp
but be aware that battery will discharge and deteriorate over time. To overcome this you could connect battery to a trickel charger or alternatively connect the pump to a small 12V power supply.
Answer by: Website Customer Service (AL) on 18/10/2021, 4:27 pm
