Ados 121 is an epoxy with glass fibres already integrated into the hardener. This makes for easy, flexible and strong fibreglass repairs. It's your toolbox in a can.
- Epoxy with integrated glass fibres
- Quick and easy to use
- 1:1 Mix Ratio of resin and hardener with integrated glass fibres
- Waterproof with no osmosis
- Bridges gaps, self supporting
- Flexible and cures underwater
- Suitable to drill, mill, tap, screw, sand, plane and saw
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
Product Questions
ADOS 121 epoxy
under "specification" - what does "12mm" mean ?
under "specification" - what does "12mm" mean ?
Question by: john on 31/10/2021, 5:50 pm
Due to a system issue most products are showing 12mm in specs section at present.
Answer by: Website Customer Service (AL) on 1/11/2021, 12:18 pm
Answer The Question
I've used this product on the edge of a boat where the edge has broken. It's not setting hard., definitely still a bit of movement in it. Should it set hard or am I using the wrong product. If I need to add more of one of the tins, which one please?
Question by: Connie Bell on 19/12/2021, 10:16 am
Hi Connie
Its difficult to make any recommendations without seeing the damage, I'm sorry. This product will give a flexible repair, but if you want the joint to be solid then more reinforcing may be required. If you could send some photos to website@burnsco.co.nz, for us to look at for you?
Regards
Burnsco Webstore
Its difficult to make any recommendations without seeing the damage, I'm sorry. This product will give a flexible repair, but if you want the joint to be solid then more reinforcing may be required. If you could send some photos to website@burnsco.co.nz, for us to look at for you?
Regards
Burnsco Webstore
Answer by: Website Customer Service (GC) on 20/12/2021, 9:59 am
