Compressor fridges reject heat through the condenser. Without clear inlet and outlet airflow they run hotter, louder and less efficiently - and can struggle in NZ summer heat. Never block vents with gear or insulation.

Confirm power at the unit, fuses and cable gauge. Check vents aren’t blocked, the door seal is clean, and the set temperature is realistic for ambient heat. Overpacking can also restrict internal airflow.

For absorption (gas/electric) models, also verify the correct energy source and that the vehicle is reasonably level.

Yes, via a correctly sized battery bank and charge system. Compressor fridges (NRX) are generally more efficient for solar than older absorption units. Size panels and battery for overnight draw - Burnsco can help match PLB / inverter gear to your fridge.

Yes in settled weather with tie-downs fitted. Dry the fabric before winding into the cassette for longer storage to avoid mildew. Keep the zip track clean of grit and salt.

Rinse salt and dirt with clean water; use mild soap if needed, then rinse thoroughly. Lubricate zips with a suitable zipper care product - never force a sandy zip. Check seams and flysheet periodically for wear.

Ventilate - open windows or vents, especially overnight. Avoid drying wet gear inside a sealed room. A small gap for airflow makes a big difference in damp NZ conditions.

Many PLB models support charging from a vehicle socket - check your specific unit’s manual for current limits and charge times. Use the correct cable and avoid undersized cigarette sockets for high draw.

Store cool and dry, partly charged (not fully empty), and top up periodically if left unused. Extreme heat or cold reduces performance - don’t leave packs baking in a closed vehicle.

Often yes, if solar input and battery capacity cover the fridge load. Match panel wattage, controller and battery to the cooler’s average draw. Ask Burnsco if you need help sizing panels and battery to your fridge.

Add up the watts of devices you’ll run together, then allow headroom. Burnsco stocks 350W and 1600W Dometic pure sine options - smaller for devices, larger for tools or kitchen loads. Ask in-store if you’re unsure.

Order through Burnsco with your model / SKU, or contact Dometic support for part identification. Bring the old unit’s label if possible so we can match the correct replacement.

Let surfaces cool, wipe grease while warm with a soft cloth, and avoid harsh abrasives on coated plates. Clean BBQ grids and Skottel-style pans after each use; dry fully before packing to prevent rust.

Confirm the cylinder has gas, connections are tight, and jets aren’t blocked. Clear wind away from the burner. If ignition still fails, try a long match / lighter at the burner and book a service if the piezo or valve is faulty.

Yes - use the gas type your appliance is certified for. Propane performs better in cold weather; butane is common in cartridges for portable stoves. Never mix regulators or hoses that aren’t rated for your setup.

Treatment tabs control odour and help break down waste in the cassette. Follow the pack dose for your tank size, and empty at approved dump points. Greencare options suit users looking for a milder formulation.

Rinse the cassette after emptying, keep seals clean, and don’t overfill. Use toilet paper designed for cassette / marine systems so it breaks down properly.

Burnsco stocks Dometic accessories and spares across the range. Handles, latches, rafters, privacy rooms, vents and more. Visit a store or contact the team with your SKU for fitment advice.

Talk to the Burnsco team in-store or online with your product SKU for manuals, spare parts and NZ-specific install tips.

Full Burnsco terms and conditions, including online shopping and pricing, are on the main website.

Read Burnsco terms and conditions