Have existing similar solar vents , now 7 years old and worn out, ex Burnsco. Wish to replace them.
What is the deck cut out hole size for this UPC28387 vent?
Thanks so much.
Cheers
Eric
What is the deck cut out hole size for this UPC28387 vent?
Thanks so much.
Cheers
Eric
Question by: Taupo Boating Co on 27 Oct 2021, 9:16 am
Approx 120mm cutout needed for this solar vent
Answer by: Website Customer Service (AL) on 27 Oct 2021, 4:07 pm
Does this solar vent meet requirements for a camper with two burner gas cooker to comply for self containment certificate
Question by: Graeme Drewery on 20 Nov 2021, 9:52 am
A self containment certificate deals with water and waste handling not gas appliances and ventillation. Any gas appliance must meet appropriate NZ/Aus standards and should be installed by a registered gas technician.
This solar vent moves 25 m3 of air per hour. Please consult a specialist gas appliance installer for certification and ventillation legal requirements
This solar vent moves 25 m3 of air per hour. Please consult a specialist gas appliance installer for certification and ventillation legal requirements
Answer by: Website Customer Service (AL) on 22 Nov 2021, 9:52 am
I've looked at the photos you've provided but can't locate the on/off switch....is it seperate from the vent or located on it.
Question by: Cindy on 18 Apr 2024, 8:06 pm
There is an push on/off switch located inside the vent. You can press easily with a finger, thanks.
Answer by: Website Customer Service (JW) (Admin) on 19 Apr 2024, 10:21 am
Can you get these to suit a 100mm hole cut out
Question by: Brendon on 18 Apr 2026, 12:15 pm
Sorry, we do not have any other sizes available. The closest is upc 27798, with a 104mm approx cut out or upc 27802 with a 94.5mm cut out, cheers!
Answer by: Website Customer Service (JW) (Admin) on 20 Apr 2026, 9:12 am
© Copyright Burnsco 2026
Compare