This water heater must be installed outside in a well-ventilated area. Users are to install strictly in accordance with the supplied manual. It's important to do a soapy water test on all connected fittings before operation.

Enjoy hot water anywhere with this easy to use, portable gas water heater. Featuring a compact, portable design so that you can have instant hot water on the go. Attach the blue hose to a pressurised fresh water supply and regulator hose to a gas tank, and a hot shower is just a turn of the tap away.

• Instant hot water, achieves 25 degrees increase at 5.5LPM (or higher at lower flow rates)
• Water flow of up to 5.5 litres per minute
• The internal micro-processor prevents the water temperature from going above +45C, protecting family and pets
• Simple operation with two dials to control temperature and flow rate
• Temperature display panel on the front so you can control to your desired temperature
• Steel housing, white enamel finish
• Automatic ignition - no pilot light (starts when tap is turned on, stops when tap is turned off)
• Easy-connect colour coded hoses
• Adjustable three spray pattern handset for all uses
• Automatic gas cut off after flame failure
• 20 minute cut off safety timer
• Accepts fresh water from any source
• Requires minimum 30psi to 55psi maximum pressure to run effectively. Burnsco offers a range of submersible or non submersible pumps for this task
• Requires 2 x D cell quality alkaline batteries for operation (not included)
• Includes 1.5m water inlet hose, 1.2m LPG hose, shower head and 2m hose
• This water heater must be installed outside in a well ventilated area. Users are to install strictly in accordance with the supplied manual and the AS/NZ55601 and NZS5428 gas standards. We recommend a soapy water test on all connected fittings before operation.
• ISO9001 Certified
• Dimensions: 370(l) x 290(w) x 150(d) mm